Servo-Drives

DS19

DS19 is digital (DSP based) servo driver for BLDC or DC servomotors for machine tools.

Full range functions

  • Speed control, torque control and position control available;
  • Digital and analogue reference (pulses;14bit and ±10V)
  • Feedback: encoder (2500ppr); tachogenerator
  • - Position control with programmable deceleration and acceleration value;

looking for reference point using external switches

Advanced technology

We apply advanced technology of DSP and IPM and intellectual calculation to entitle the controller of optimized dynamic and static features.

Full range types and series to meet all your need

For BLDC motor drives – up to 50Nm

For DC motors -30,50,100,150Amp

The servo drives have

provided over load, over voltage, over current, overheat, and wires disconnecte

Easy to use, easy to maintain

No accessories required, all the parameter setting, operation and status monitor could be realized in drive panel or with the connection to PC, all the parameter setting, operation and status monitor could be realized in WINDOWS interface by remote control.

Accesories

Industrial optical incremental encoders with resolution 1024/2500 ppr

Manual pulse generators 100 ppr

Rotary coded switches for machine panles (up to 24 positions).

Signal converters – emulators

SiDC: sinusoidal current to digital converter/interpolator. Converts 11uA sinuasolidal input to incremental encoder output with multiplier x1, x2, x3, x5, x10, x12, x16.

RDC: resolver to digital converter. Emulates incremental encoder with hall sensor for motor control (A,*A,B,*B,C,*C, U,*U,V,*V,W,*W). Resolution for signle turn resolver from 1024 to 4096 ppr.